Steam-Water Heaters
|
Steam-Water Heaters
|
|
|
Steam-Water Heaters Constantemp® Feedwater System Obvious though it seems, many facilities with steam-generating capability overlook the economy and convenience of using some of that steam to heat water or other liquids. Leslie Constantemp® heaters use a tightly coiled
circulating exchanger to transfer heat energy from the isolated steam flow to the desired
liquid. These systems can take advantage of very low steam pressures and can deliver
liquids at precisely defined temperatures. Leslie Constantemp® steam heaters are available in two steam inlet pressure ranges: 2-15 or 15-200 psig. Heating is instant on demand and capacity can be as much as 7,200(usg) 5,995 (imp) p/h. Temperature variation is a maximum of ± 4ºF/ 2.2ºC. The standard coil material is copper but Admiralty and cupro-nickel coils are available as special service options. The heart of the Leslie Constantemp® steam water heater is
the feedforward-blending device. The hot and cold water ratio is accurately proportioned
to Should movement of the blending valve be restricted by foreign matter carried in the water flow, a yielding spring arrangement allows the diaphragm and stem to move up uncovering a heat damper, the characterised blending valve. This damper allows more cold water to enter the blended mix eliminating the possibility of overheating or scalding. Available sizes include 15, 30, 45, 60, 75, 90, 105 and 120usg/ 100gl per minute models with adjustable ranges from 105ºF/ 40ºC to 180ºF/ 82ºC. Constantemp® Skidded
Heater Systems The Skidded Concept All the guess work and preparation time is eliminated and Leslie assumes full system responsibility. There is never a question as to pipe size distance to the steam reducing valve or proper trap installation. All the work is done for you except for the utility connections. The standard package has everything necessary to operate the heater. Optional equipment includes recirculation pumps, pumping traps, steam reducing valves and redundant safety shutdown devices. All connections are flanged and are placed at the edge of the assembly. Even the largest unit will fit through a standard doorway. Or we can custom design a system to suit your unique requirements. Everything you need to get yourself started in hot water FAST - engineered, manufactured and assembled by the steam management experts at Leslie Controls Inc.
|
Send mail to Bosun@dscontrolvalves.com with questions or comments about this web site.
|
maintain
the set temperature for all flow demands. Water is blended instantly; automatically; with
virtually no lag in response time.
economical method of installing equipment. In
most cases installing it yourself would cost less than hiring an outside contractor, if
you have the manpower, the time and expertise to install the equipment. (When installing
even the simplest piece of equipment, it takes time to read the instructions, determine
the materials needed, purchase the materials and complete the installation.)